Canon Pixma MX328 Printer Error 5200

Canon Pixma MX328

What is Error 5200 in Canon Pixma MX328?

Canon has not mention error 5200 on most canon manual. What is this error stands for? For Canon Pixma MX328 model the error code 5200 means that the  printer detected that the ink cartridges (both black and color) inside the printer was already run out of ink. The printer has its ink counter for measuring the remaining ink inside the cartridges. The printer does it by counting  the number of printed pages that it can produce.

When is this error most likely to occur?

If you use a manufactured ink to refill the out-of-ink cartridge, and then,  the printer detected that it reached the maximum allowed pages for printing using this ink, this error will occur.

How to Fix Error 5200 in Canon MX328?

Canon does not allowed to use manufactured ink on their printer. That is the reason  why they do not  mention 5200 on their manual. For them, they advise consumers to use OEM ink for their printer. For which I also agree. Because the best solution to fix the problem is to use a genuine ink cartridges from Canon.

However, for those canon users who wanted to save some money by using a refilled cartridge the best solution for them to clear this error 5200 is to reset the ink counter of Canon MX328.

Follow the steps below to clear the ink counter and fix error 5200:

1. Start this procedure by turning off the printer.

2. Press and hold the STOP/RESET button.

3. While holding down the STOP/RESET button, press and hold the Power ON button.

4. While holding the Power ON button, release the STOP/RESET button.

5. While holding still the Power ON button, press twice the STOP/RESET button.

6. Release the Power ON button.

7. Wait until it display an "idle" message. ( At this point the printer state is at service mode)

Canon MX328 with cartridge carrier exposed

8. When "idle" appear, open the top cover (both ADF scanning unit and Flatbed scanning unit) to expose the cartridges.

9. Lift up the cover for cartridge holder and take out both the black and color cartridges.

10. Return the cover of cartridge holder and turn off the printer.

11. Return the top cover and turn on the printer again.

12. After the printer initialize, return the cartridges.

I hope this simple procedure will help fix the error 5200 on you printer.

Canon Pixma MX328 Printer Error Check Ink U163

Canon Pixma MX328

What is Error U163 in Canon Pixma MX328?

U163 is an error code that appears in the LCD Display Panel after the printer detected that an ink has run out from 1 or 2 of the ink cartridges inside the printer.

During the printing process when the ink run out from the ink cartridges and the paper print is blank, this error will not appear unless you remove the black and the color ink cartridges from the cartridge carrier. After you refill them using manufactured inks and return them back inside the printer, error u163 will appear. This because the printer detected that the ink cartridges that you place inside the printer was already out of ink. 

How to Fix Error U163 in Canon MX328?

 

The best advise is to replace the empty ink cartridge with OEM cartridge. However, for most printer users who wants to save extra money, they would resort to refilling their empty cartridges with manufactured inks.And later experience the U163 error.

Here is what you need to do to clear this error:

Canon Pixma MX328 Stop/Reset Button

1. While the printer is on, return the refilled cartridges inside the printer and close the top lid cover together with the scanning unit cover.

2. Wait for the error to appear. If the error did not appear, try printing or copying, to display this error in LCD display panel.

3. When error is there, press and hold the Stop/Reset button. Do not release the Stop/Reset button until you see the printer self-restarted.

4. After the printer initialize successfully, you can now release the button.

Note: On some occasion after it clears the U163 error, the next error to appear is U162. You just need to press and hold again the Stop/Reset button and wait for it to self-restart before you release the button.

Canon Pixma MX328 Printer Error 5100

Canon Pixma MX328

What is Error 5100 in Canon Pixma MX328?

5100 is a carriage home position error most commonly experience when using Canon Printer most especially model of Canon Pixma. This error occurs when the carriage, or the ink cartridge carrier, can not move freely and suddenly stops while printing. As soon as the printer is turn on, and something prevented the cartridge carrier from completing its initialization process then the error 5100 also appears in the LCD control panel.

How to Fix Error 5100 in Canon Pixma MX328?

Canon MX328 with cartridge carrier exposed

By careful inspection on the sliding mechanism of the carriage you can pinpoint if there is an obstruction on the print path.

But first of all, while the printer is on, you need to lift up the top lip cover together with the scanning unit cover to expose the cartridge carrier. See the figure: 

What you need to do next is to unplug the power cord at the back of the printer leaving the cartridge carrier at the center position of the printer.

Then, you can follow the following steps to figure and fix the obstruction that cause carrier not to park properly in the home positon:
1. Use your hand to move the carriage sideways and look for paper or small objects that obstruct the movement of the carriage. Look on the farther right cause often crumpled paper, tapes and dried ink in the absorber pads are the culprit.
2.  Feel the movement, if the carriage seems to stuck, you may need to lubricate the sliding mechanism.
3. If you are using a CIS or Contineous Ink System, check to see if the ink tube is properly fix inside.If the tube is loosen up at the ink cartridge carrier, this is primarily the cause of the problem.

After you figure out what cause the obstruction, plug the power cord at the back of the printer and see how the error code disappear.